ESD, chemical, and impact-rated industrial epoxy floor systems.
Industrial epoxy is spec-driven. Contractors match a system to the exact chemical, thermal, and load conditions of the facility — from ESD floors in electronics assembly to novolac epoxy in acid rooms to urethane-mortar in food and beverage plants. Project managers should expect a detailed submittal package with resin data sheets, adhesion and moisture test results, and a written warranty covering delamination and premature wear.
Industrial epoxy is a spec-driven category. Contractors match the resin chemistry, thickness, aggregate profile, and topcoat to the exact chemical, thermal, hygienic, and load conditions of the facility. Static-dissipative (ESD) epoxy grounds through embedded copper strips for electronics assembly and munitions handling. Novolac epoxy resins survive concentrated sulfuric, hydrochloric, and nitric acid contact in battery rooms, plating lines, and chemical processing. Urethane-mortar overlays 1/4"–3/8" thick handle steam-cleaning, freezer-to-oven thermal shock, and forklift point loads in dairies, breweries, and meat plants. USDA/FDA-compliant systems with integral coved base extend up the wall for wash-down sanitation. The right system routinely lasts 15–25 years in punishing environments; the wrong one fails in months, so a written specification, adhesion and moisture testing, and a bumper-to-bumper warranty are non-negotiable on any industrial job.
Novolac is a phenolic-based epoxy resin with exceptional chemical resistance, used in acid containment, battery rooms, and chemical processing.
Yes — ESD epoxy systems are specified in electronics manufacturing, munitions, and any space where static discharge is a hazard.
Urethane mortar is a 1/4"-thick cementitious-urethane hybrid that survives thermal shock (steam cleaning, freeze-thaw) — standard in food and beverage plants.
Yes — with the correct resin, an integral coved base up the wall, and a non-porous topcoat, systems pass USDA/FDA and 3-A dairy inspection.
Properly specified and installed, 15–25 years is normal in food, beverage, and manufacturing plants. Warranties commonly run 5–10 years bumper-to-bumper.
Yes — chemical-resistant novolac and vinyl-ester systems are installed over concrete containment berms and sumps to meet EPA and state secondary-containment codes.
Durable, chemical-resistant epoxy coatings for residential garages.
High-traffic epoxy finishes for retail, offices, and showrooms.
Heavy-duty epoxy coatings engineered for forklifts and pallet jacks.
Decorative metallic-pigment epoxy finishes with mirror-like gloss.